Dantherm CDT 90, Service Manual

Page: 53 / 170

53
036486 •
Ver
s
ion
1.2 •
17.0
8
.200
9
Set up and transport of the unit,
continued
Placing
Place the dehumidifier:
•
in the middle of a room if possible to ensure
good air circulation
•
where air can be sucked in freely at the back
of the unit and blown out at the front
•
with a minimum distance on the supply air
side from a wall of about 60 cm (see drawing).
The minimum distance on the exhaust air side
should be 3 m
•
away from any source of heat e.g. a radiator
In addition, ensure that windows and doors to the open are closed in the room to be
dehumidified.
Electrical connec-
tion
The dehumidifier is complete with cable and plug and ready for connection to a
230V/50Hz socket. Protect the socket with a 10A fuse or a 16A circuit breaker.
Wheels
The wheels are mounted opposite the cabinet for easy transport up stairs without dam-
aging the cabinet on the steps
Transport
of/moving the de-
humidifier
Two people or a crane can move the dehumidifier. See instructions below:
Note: Observe local working environment rules as regards heavy lifting!
2 people Hoist/crane
Lift with one person by each arrow: Lift by lifting strap