Preparation and Checking before Operation
10
Handle
How to Operate
■
Your dehumidifier will stop automatically after the hours set by the timer (2H, 4H or 8H)
■
In any mode, you can press "Timer Select" switch to set the timer 2H or 4H or 8H.
Make sure that the water tank is set properly.
Your dehumidifier cannot be operated when the water tank
is full of water or it is not set properly.
How to remove
Draw the water tank gently toward you by holding the
concave part of the tank.
How to set
Push the tank horizontally and gently. The handle lies down
by itself.
When you empty water from a water tank
1.
Remove the water tank from the dehumidifier.
2.
Hold the tank by the handle and carry it gently.
3.
Tilt the tank to the direction as shown and slowly empty
the water out of the tank.
4.
Set the tank in the dehumidifier.
Note
After the dehumidifying operation, water is
collected in the water tank. When the tank is full of
water, the dehumidifier stops operating
automatically and the buzzer sounds. The buzzer
sounds for 10 seconds when the tank is taken out
during the operation. For continuous draining, see
the page 16.
Plug in the dehumidifier to an outlet.
■
"Automatic"mode lamp will sound" beep"one time.
■
"Humidity indicator" mode lamp will light up and show the room
humidity.
■
Make sure that the water tank is set properly.
Open one of the air outlet flaps suitable for the desired operation.
Handle
