29
039073 • V
ers
ion
1.
0 • 05
.03.
2007
Driver for rotor exchanger
Description
The rotor exchanger is run by a step motor with a control box. The unit is provided with
a revolution controller consisting of a magnet attached to the rotor exchanger and a
reedswithch connected to the control box (see the wiring diagram below).
The motor and the control box are placed right behind the cover plates of the module in
the same side as the control panel.
Wiring diagram
This shows the wiring diagram:
Jumpers
The control box PCB is fitted with 3 jumpers, J3, J2 and J1.
It is imperative, that the jumpers are set for the current operating situation
Rotation guard – jumper 3
Setting
The unit is fitted with a rotation guard as standard
ON
Max. motor speed – jumper 2
Model
Rotor diameter,
mm
Motor speed, RPM
J2
Setting
BasX 2
800
150
ON
BasX 4
1050
200
OFF
Continued overleaf
