46022-30-0198 <90-00067>
P
AGE
7
T
ABLE
A - S
WITCH
O
PTIONS
2. C
OMMUNICATIONS
S
UBASSEMBLY
The 46022-30 MAC accepts subassemblies that provide addi-
tional functions. The unit comes equipped with a subassembly
bypass card. Remove this bypass card to install an optional
subassembly.
Refer to Fig. 4.
♦
The front panel plug is removeable to allow the subassembly
front panel to appear in the front panel cutout.
♦
Subassemblies plug into J4 and J5. Verify that each pin goes
straight into its socket. The subassembly should sit down on
stand-offs and the front panel should appear straight in the
module front panel cutout.
♦
Only one subassembly can be mounted at a time.
♦
Subassemblies may be ordered factory-installed, or may be
installed in the field.
Refer to the documentation specific to the subassembly for
operating instructions for that subassembly.
3. W
IRING
Refer to Fig. 5 for module connector pin designations. Wire
connector if or as necessary. Refer to Table B for subassembly
pin connections.
CARD ADDRESS
1
2
3
4
CHANNEL ADDRESS
1
2
3
4
5
6
7
8
SWITCH SETTING
S1-1
S1-2
OFF
OFF
ON
OFF
OFF
ON
ON
ON
SWITCH SETTING
S1-3
S1-4
S1-5
OFF
OFF
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
CONTINUED
. . .
INSTALLATION
