Dantel 46022-30 Installation & Operation Manual Download Page 2

P

AGE

 2

46022-30-0198 <90-00067>

ORDERING INFORMATION

NOTE:

This section lists the different options available for this product. To order any of the avail-

able options, contact Dantel Inside Sales through our toll-free number, 

1-800-432-6835.

OPTION NUMBER

FEATURES

A11-46022-30

Multiple Alarm Combiner

GENERAL DESCRIPTION

T

he 46022-30 Multiple Alarm Combiner (46022-30) is used in

the 460 Alarm and Control System (460 ACS). It allows a

standard shelf, wired for MAC-12s or Smart MACs, to be used in

applications where an interface other than RS-422 is needed.
The MAC-30 provides a single port capable of holding a standard

Dantel communications subassembly.
The MAC-30 replaces a MAC-12 or Smart MAC and can be

programmed for any one of the eight ports normally provided by

that MAC. It can also be programmed for applications where

more than one MAC-30 is wired into the shelf.
The 46022-30 has a front panel cutout for viewing the front of an

optional subassembly and has a green LED labeled “CHAN

ENB”. This LED lights when the address of the unit is being

polled by the system. The unit supplies regulated power output

for use by other modules
The 46022-30 is a plug-in printed circuit module that fits into

any Dantel 400-type or similar equipment housing. It operates

on -21 to -56 VDC input power.

Summary of Contents for 46022-30











Reviews: