05615-0198 <90-00048>
P
AGE
3
INSTALLATION
I
nstalling the 05615 Universal Alarm Test Set consists of:
♦
Setting switches and straps.
♦
Connecting cables to external equipment.
♦
Configuring the MAP.
♦
Connecting the terminal to the MAP craft/printer port.
NOTE:
Before beginning, verify that the Test Set is equipped as
illustrated on the front cover of this manual.
1. Set the switches and straps.
1.
Refer to Fig. 1 and Table A for the 44210 460 Modem module strap
and switch settings. Set the straps as shown in Fig. 1.
2.
Refer to Figs. 2 and Table B for the 46020 Multiple Alarm Proces-
sor (MAP) module switch settings. To download the configuration
file to the MAP, set the printer port protocol for DCPF or Printer
Protocol.
3.
Refer to Fig. 3 and Table C for the 46022-30 Multiple Alarm Com-
biner (MAC) module switch settings. Set all switches on S1 OFF
(card and channel addresses are both 1).
4.
Refer to Fig. 4 and Table D for the 49008 Current Loop Interface
subassembly strap settings.
5.
Refer to Fig. 5 and Table E for the 49013 202 Modem subassembly
switch and strap settings.
6.
Refer to Fig. 6 and Table F for the 49029 RS-232 Current Loop
Interface subassembly switch and strap settings.
7.
There are no switch or strap settings for the 46090 RS-232 Connec-
tor module.
8.
Install all modules in the test set.
NOTE:
Each test set includes detailed A18-05615-42 application
drawings. You can also order application drawings as
necessary. These drawings show all connections and card
locations.
CONTINUED
. . .
