unDNEMO
User Manual
Attero Tech LLC 2016
Page 12
614-00030 Rev 02
3.2 – PoE Deployment
The unDNEMO supports PoE 802.3af power on the left-most Ethernet port labeled “PoE+Data” on the rear panel of the
unit. To utilize PoE, connect CAT-5e or better cabling between the PoE port of the unDNEMO and an 802.3af compliant
PoE Ethernet switch or midspan power injector.
In this configuration, PoE cannot be daisy-chained and each device requires a CAT-5 connection back to the Ethernet
switch. The following diagram shows the unDNEMO devices used with an Ethernet switch providing both PoE and Dante
connections, with audio sourced from an Attero Tech unD4I 4-channel analog input to Dante interface.
Figure 18 - PoE Deployment