Page
17
of
33
In the Beatrice units the incoming audio circuit has adjustable level control (to adjust
the incoming level of one circuit, press the associated talkback key and adjust the
Volume/ setup knob).
This ‘End stop’ menu adjusts the minimum level that the audio circuit can be set to,
where ‘0’ equates to off and ‘10’ equates to full volume.
M. Mute LS
Mute LS, this control is either on or off. It turns the front panel loudspeaker on or off.
N. Save Preset
There are 4 presets available. If you select a preset (1
– 4) and push the volume/
setup knob then all the current settings will be saved to that position in non-volatile
memory. If there was a previously saved preset on the same preset number this will
be overwritten.
Please note the preset only saves configurations available via the menu system, it
does not save any Dante network information.
O. Load Preset
The load preset menu recalls previously saved configurations.