Description of parameters of Smart Track Config
Parameter
Description
Track Duration
Supports setting the upper and lower limits of duration.
If the target of track is two or more in the screen
,
the
maximum length of the tracking is the lower limit of the
setting duration; If there is only one target in the screen, the
maximum length of tracking is the upper limit of the setting
duration.
Idle Back To
Preset
Select "Enable", after enabling the Idle Back To Preset
function, when there is no target that reach the setting
duration, the picture of PTZ Dome go back to the Preset
point.
4.
Click "Save".
Then the system displays interface of the calibration of Smart Track, as
shown in the picture below.
Step 4
Calibrate TPC and PTZ Dome, as shown in the picture below
Note: Configure the mark pair at least 4 pairs, maximum 8 pairs, 4 pairs is
recommended.
Summary of Contents for DNA1425T
