Dante DLS1101, Installation And Operation Manual

Page: 27 / 30

27
15. White Balance Mode Set Command (0xAA & 0x60 series Command) ; Set the mode of
White Balance according to WB_CNT.
1) PC=>Camera
0xC5 0xAA 0x65 WB_CNT CAM_ID CS
2) Camera->PC
0xC5 0xAA 0x65 WB_CNT 0x65 0xXX 0xXX 0xXX CS
a) WB_CNT : This is a counter to change the mode of White Balance
6. In case of WB_CNT = 0, the mode of White Balance becomes a “AWB” mode
7. In case of WB_CNT = 1, the mode of White Balance becomes a “WAWB”
mode
8. In case of WB_CNT = 2, the mode of White Balance becomes a “INDOOR”
mode
9. In case of WB_CNT = 3, the mode of White Balance becomes a “OUTDOOR”
mode
10. In case of WB_CNT = 4, the mode of White Balance becomes a “MANUAL”
mode
16. SHARPNESS Data Setting
Set the Sharpness level of the camera according to the data of “Sharpness”.
1) PC=>Camera
0xC5 0xAA 0x79 Sharpness CAM_ID CS
2) Camera->PC
0xC5 0xAA 0x79 Sharpness 0x79 0xXX 0xXX 0xXX CS
Sharpness ; This data for which adjusts a sharpness level of the camera.
Data value range :: 00d~20d (default : 10d).
17. BRIGHTNESS Data Setting
Set the Brightness level of the camera according to the data of “Brightness”.
1) PC=>Camera
0Xc5 0xAA 0x7A Brightness CAM_ID CS
2) Camera->PC
0xC5 0xAA 0x7A Brightness 0x7A 0xXX 0xXX 0xXX CS
Brightness; This data for which adjusts a Brightness level of the camera.
Data value range :: 00d~90d (default : 30d).