Dante DLS1101, Installation And Operation Manual

Page: 23 / 30

23
6. Non Zoom Tracking PRESET control: Move the Zoom and Focus lens to each position
and set the Digital Zoom ratio according to data memorized in PRESET Buffer RAM
designed ‘INDEX’
1) PC=>Camera
0xC5 0x4D INDEX 0x00 INDEX CS
2) Camera->PC
0xC5 0x4D INDEX 0x00 INDEX 0xXX 0xXX 0xXX CS
a) INDEX: Position setting index of PRESER Buffer RAM to change Zoom, Focus &
Digital Zoom position
Caution: The range of INDEX is from 0x00 to 0x07
7. CAM ID Read : Read the data of Camera’s ID.
Caution: This command must be used only in the condition of one-connection PC
vs CAMERA
1) PC=>Camera
0xC5 0xCC PRE_I_FH FPL CAM_ID CS
2) Camera->PC
0xC5 0xCC 0x00 0x00 CMA_ID 0xXX 0xXX 0xXX CS
a) CAM_ID : The Camera ID data of a CAMERA
b) In this case, The Camera ID is displayed at the left-bottom position of the
screen. But if the Camera ID is 0x00, It is not displayed.
8. Menu OSD Display On/OFF Setting
Set the MENU OSD Display mode of the camera of the camera to ON or OFF according
to the data of ‘MODE’.
1) PC=>Camera
0xC5 0xAA 0x63 MODE CAM_ID CS
2) Camera->PC
0xC5 0xAA 0x63 MODE 0x63 0xXX 0xXX 0xXX CS
MODE:
In case of MODE = 0x01, MEN OSD Display mode is changed to ON mode.
In case of MODE = 0x00, MEN OSD Display mode is changed to OFF mode.
Otherwise, MENU OSD Display mode is not changed.