8
STEP 3 Install Dome Drive
GREEN TAB RED TAB
1.
Set the protocol, baud rate, dome address and camera type for the needed position.
2.
Line up the integrated dome drive’s red and green tabs with the green and red labels. Push the green tab
into the green label and the red tab into the red label, till both sides click into place.
3.
STEP 4 Install lower Dome
1.
Apply lubricant to the O-ring. Install the O-ring in the groove on the trim ring of the lower dome.
2.
Attach the back trim leash to the lower dome. Use retainer screw (nearest to a mounting screw) inside
lower dome.
Push the lower dome into the back box, line up the mounting screw holes, and install the two mounting screws
.
7. SPECIFICATION
6.1STRUCTURE
Back box Aluminum alloy
Dome Drive Aluminum alloy, ABS Poly
Lower Dome Aluminum alloy, polypropylene Transparent Cover
Weight (approximate)
Unit weight Gross weight
3.5 kg 6 kg
Operation Environment indoor/Outdoor style
Working temperature -40
°
°
°
°～
～
～
～
50
℃
℃
℃
℃
Measurement See measurement drawing (unit: mm)
