6. MENU OPERATION
This series camera has in-built menu to setup to camera and lens’ parameter. In this
chapter, you will get a whole knowledge of the camera, and get some useful operation
skills.
The basic operation of the menu includes: move menu bar, enter next menu, turn back to
previous menu, change setting value, confirm change and cancel change.
This P/T camera opens menu by preset 95 and exit by preset 94 according to P control
protocol. Please refer to controller instruction book for other control equipments.
Press “9”+”5”+”PRESET”
Press key 95+ PRESET to enter pan tilt camera menu
Press “9”+”4”+”PRESET”
Press key 94+ PRESET to exit pan tilt camera menu
6.1 MENU OPERATIOS INSTRUCTIONS
The DLM1771-DLM1772-DLM1775 series P/T camera system is set by default to P/D
protocol. Use preset position No.95 to open the main menu. For other protocols, please
refer to protocol instruction.
The basic operation of the menu includes: move menu bar, enter next menu, turn back to
previous menu, change setting value, confirm change and cancel change.
Control up and down command: move menu bar and change setting.
Iris open command: enter camera menu or select menu to verify change
Iris closed command: return former menu and cancel change
Please open menu by preset 95 and exit by preset 94 according to P/D control protocol.
Please refer to controller instruction book for other control equipments.
Press “9”+”5”+”PRESET”
Press key 95+ PRESET to enter pan tilt camera menu
Press “9”+”4”+”PRESET”
Press key 94+ PRESET to exit pan tilt camera menu
NOTE:
1. “< >”symbol means it contains next menu
2.use “up, down” key to move cursor “
→
”, use “OPEN or CLOSE” key to confirm or exit the
menu
3. When press “OPEN” key, the cursor becomes”
★
”, then may use “UP or DOWN” key to
amend the parameter; press OPEN key when finish your amendment.
Summary of Contents for DLM1771
Page 12: ...DLM177x Pedestal Mount...
