background image

Dear Pellet Appliance Owner,

UPDATES

Updated manuals, product registration and warranty information can be found on our website:

Thank you for selecting our wood pellet stove!

2

Sincerely,
Dansons Group Inc. and Canadian Comfort Industries

www.dansons.com/support

FOREWORD TO

NEW OWNERS

Congratulations on the purchase of your wood pellet appliance.  You
have selected the finest in residential wood pellet heating technology.

This OPERATIONS GUIDE will walk you through the initial setup of
your pellet stove, from first light to fine tuned adjustments.  We have
also included detailed information on cleaning and maintenance
as well as wood pellet fuel facts.

Please note the following points regarding stove installation and
pellet heating in general:

- Whether you install your stove yourself or hire a professional
installer,

a quality installation is a must

 for the safety of your family

as well as efficient, satisfactory operation.

- Initial setup of the stove is the most important step to ensure
consistent, comfortable operation.

- Know the quality and characteristics of the pellets you burn.
Pellets can vary greatly from company to company, from load to
load and even from bag to bag.

- Be dilligent in your cleaning program.

- Remember that most operational dilemmas with pellet stoves arise
from improper installation, poor quality pellets, lack of timely
cleaning or incorrect air flow adjustment.

With a minimum amount of consistent care, your pellet appliance
will provide years of clean, efficient, comfortable and environmentally
sound heating.

We do NOT recommend pellet stoves as your only source of heat.
Do NOT install in a sleeping room.
Use of outside air is highly recommended with our pellet stoves, heaters and inserts.
Do not operate with the front door or hopper lid open.
Keep children, furniture, fixtures and all combustibles away from any heating appliance.
Installation and use of a carbon monoxide detector is highly recommended.

Summary of Contents for CAN/CSA B365













Reviews: