Danor Eco TOP-BALL12, User Manual, Page: 8 / 10

d) Mater Mode

Select the Show Mode menu, press the button. And then rotate the button to select run
mode 01-08.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically
e) Slave mode

Select the Slave Mode menu, press the button. And then rotate the button to select slave1
or slave2.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
f) Sound active mode

Select the Sound mode menu, press the button. And then rotate the button to select
setting “Sens” .

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
g) Manual Control

Select the Manual Control menu, press the button. And then rotate the button to select
corresponding parameters.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
h) Function
1. Pan Inverse

Select Pan Inverse menu, press the button. And then rotate the button to select settings:
“Normal” (pan inverse) or “normal”.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
2. Tilt Inverse

Select Tilt Inverse menu, press the button. And then rotate the button to select settings:
“Normal” (tilt inverse) or “normal”.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
3. Dimmer Curve

Select the Dimmer Curve menu, press the button. And then rotate the button to select
setting:[1]
（
Square Law
）
, Mode[2]
（
Linear
）
, Mode[3]
（
S-curve
）
or Mode[4]
（
Inv Square
Law
）
.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.