Danor Eco TOP-BALL12, User Manual, Page: 7 / 10

adjustment
Exit
7:Reset Yes Motor reset
No
8:Factory Sets Yes Restore factory set
No
9:Auto Test Test
Exit
Exit
5
）
Version CPU version
Exit
Under the 4) function of state, please press the button for 3s to enter password, then input 088 and enter
Calibrations menu.
4)Functions Password
（
088
）
Calibrations
1:Pan 000-255 X axis position
calibration
2:Tilt 000-255 Y axis position
calibration
3:Default 127 Restore factory initial
position
Exit
B. Menu description
a) DMX Address

Select the DMX Address menu, press the button. And then rotate the button to set initial
address code
（
001 ~ 512
）
.

Once you have set initial address code, please press the button to save and go back to
main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
b) Channel Mode

Select the Channel Mode menu, press the button. And then rotate the button to select
channel mode.

Once you have set it well, please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.
c) DMX Mode

Select the Run Mode menu, press the button to enter auto run mode.

Please press the button to save and go back to the main menu.

If you have not done anything for 20s, it will go back to main menu automatically.