DIS
User Manual
User Manual CU 6105.docx
27
Figure 6.3-M DCS 6000 Digital Conference System with advanced SW 6000 setup
6.3.11 Connecting an emergency signal
To use the emergency signal function, a switch
(normally-open) must be connected to the emergency
switch connector. When the switch is closed an
“Emergency Evacuation Message (EEM)” audio signal
present on the ‘In 2’ input is distributed to all output
channels, overriding all other audio inputs.
Important:
The level of the signal must be controlled
externally.
6.4
Using the Interactive Menu
6.4.1
Overview
The major configurations and operation options of
the CU 6105 can be set via an interactive menu, using
the 2x20 character OLED display and the 5-button
keypad.
‘Figure 5.3 A’ gives an overview of the menu
structure, however for a general description of the
settings in the menu refer to the section ‘6.5 Web
Browser’, where all CU 6105 settings are explained.
Figure 6.4-A
Menu overview
6.4.2
Navigate through the menu
Navigation in the menu and changing parameters is
done by activation the 5-button keypad:
Cycle through the menu items (Blue marking)
with the four ‘arrow’ buttons (Left-Right, Up-
Down).
