background image

DANIELS

ELECTRONICS LTD.

TM

 

 VHF Enhanced Extra Wideband Receiver Instruction Manual     IM10-VR3H040-AB 

 

ILLUSTRATIONS AND SCHEMATIC DRAWINGS ............................................ 6-1 
6.1  21.4 MHz IF/Audio Board Component Layout (Bottom) – Extra Wideband ... 6-1 
6.2  21.4 MHz IF/Audio Board Component Layout (Top) – Extra Wideband......... 6-2 
6.3  21.4 MHz IF/Audio Board Schematic Diagram – Extra Wideband .................. 6-3 
6.4  21.1 MHz FM IF Buffer Component Layout .................................................... 6-5 
6.5  21.1 MHz FM IF Buffer Schematic Diagram.................................................... 6-5 
6.6  Enhanced Front End Block Diagram................................................................. 6-6 
6.7  BandPass Filter Component Layout .................................................................. 6-6 
6.8  BandPass Filter Schematic Diagram ................................................................. 6-6 
6.9  Enhanced Front End Schematic Diagram – Extra Wideband............................ 6-7 
6.10 Enhanced Front End Component Layout – Extra Wideband ............................ 6-9 
6.11 Synthesizer Analog PCB Component Layout (Bottom) – Extra Wideband.... 6-10 
6.12 Synthesizer Analog PCB Component Layout (Top) – Extra Wideband ......... 6-11 
6.13 Synthesizer Analog PCB Schematic Diagram – Extra Wideband................... 6-12 
6.14 Synthesizer Digital PCB Schematic Diagram – Extra Wideband ................... 6-13 
6.15 Synthesizer Digital PCB Component Layout (Bottom) – Extra Wideband .... 6-14 
6.16 Synthesizer Digital PCB Component Layout (Top) – Extra Wideband.......... 6-15 

7 PARTS 

LISTS ........................................................................................................... 7-1 

7.1  Electrical Parts Lists .......................................................................................... 7-1 
7.1.1  21.4 MHz IF/Audio Main Board ................................................................... 7-1 
7.1.2  IF Buffer Board.............................................................................................. 7-8 
7.1.3  Enhanced Front End ...................................................................................... 7-8 
7.1.4  FE BandPass Filter ...................................................................................... 7-10 
7.1.5  Enhanced Synthesizer Analog Board .......................................................... 7-11 
7.1.6  Enhanced Synthesizer Digital Board ........................................................... 7-14 
7.2 Mechanical Parts.............................................................................................. 7-16 
7.2.1  21.4 MHz IF/Audio Main Board ................................................................. 7-16 
7.2.2  Enhanced Front End .................................................................................... 7-17 
7.2.3 Enhanced 

Synthesizer.................................................................................. 7-17 

8 CHANNEL 

DESIGNATION TABLES .................................................................... 8-1 

8.1  Channel Designation Table: 29-50 MHz, 5kHz Increments ............................. 8-1 
8.2  Channel Designation Table: 29-50 MHz, 6.25kHz Increments ...................... 8-13 

9 REVISION 

HISTORY .............................................................................................. 9-1 

  

 
 
 

Summary of Contents for VR-3H













































































































Reviews: