background image

D A N I E L A

D A N 9 0 A B O

U S E R   M A N U A L

P   |   0 2   9 6 0 4   1 2 2 6   E   |   s a l e s @ d a n i e l a a p p l i a n c e s . c o m . a u   |   W   d a n i e l a a p p l i a n c e s . c o m . a u

D A N I E L A

D A N 9 0 A B O

U S E R   M A N U A L

P   |   0 2   9 6 0 4   1 2 2 6   E   |   s a l e s @ d a n i e l a a p p l i a n c e s . c o m . a u   |   W   d a n i e l a a p p l i a n c e s . c o m . a u

Pg 16

Pg 17

Cook time
1. 

Select an oven function and using the      or       buttons, select the temperature.

2.

 Press the Clock Functions        button repeatedly until the symbol for Cook 

time       flashes.

3. 

Using the        or        buttons, set the desired cooking time.

The oven switches itself on. The symbol for Cook time       lights up.
By repeatedly pressing the Clock Functions         button, the current time can 
be called up.
When the time has elapsed, an audible signal sounds 3 times.
The oven switches itself odd.
“0.00“ is displayed and the symbol for Cook time       flashes.
To turn off the audible signal:
Press any button.

End time
1.

 Select an oven function and using       or        buttons, select the temperature.

2.

 Press the Clock Functions     button repeatedly until the symbol for End 

time       flashes.

3.

 Using the       or        buttons, setthe desired switch-off (End) time. 

The symbols for End time      and Cook time      light up.
The oven will automatically switch itself on.
By repeatedly pressing the Clock Functions       button, the current time can 
be called up.
When the time has elapsed, an audible signal sounds 3 times.
The oven switches itself off.
“0.00“ is displayed and the symbols for End time      and Cook time      flash.
To turn off the audible signal:
Press any button.

Cook time      and End time       combined

Cook time      and End time      can be used simultaneously, if the oven is to be 
switched on and off automatically at a later time

1.

 Select an oven function and temperature.

2.

 Using the Cook time      function, set the time that the dish needs to cook for, 

e.g, 1 hour.

3.

 Using the End time function, set the time at which the dish is to be ready,

e.g. 14:05.
The symbols for Cook time      and End time       light up.

The oven switches on automatically at the time calculated, e.g. 13:05.
When the set cooking time has elapsed, an audible signal sounds 3 times.
The oven switches itself off, e.g. 14:05.

Child safety device

As soon as the child safety device is engaged, the appliance can no longer 
be switched on.

Activating the child safety device

Press and hold the       button until       appears in the display.
The child safety device is now activated.

Deactivating the child safety device

Press and hold the button      until      disappears from the display.

The child safety device is now deactivated and the appliance is again ready 
for use.

Activate or deactivate button sound (beep)

Switching off the button beep

1. 

Switch off the appliance using the Pause / Off        button twice.

2.

 Press and hold     and     buttons at the same time until a signal sounds 

(approx.2 seconds).

The button beep is now switched off.

Switching on the button beep

Press and hold     and    buttons at the same time until a signal sounds 
(approx.2 seconds).

The button beep is now switched on again.

Summary of Contents for DAN90ABO
















Reviews: