P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 3
1.
Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 2#)
2. Touch timer control , The minder indicator will start flashing
and “30” will show in the timer display.
3. Adjust the timer setting by touch the “-“ or “+” controls.
The minute minder indicator will start flashing and will show in the timer
display.
Hint:
Touch the “-“ or “+” control of the timer once to decrease or
increase by 1 minute. Touch and hold the “-“ or ”+” control of the timer
to decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer willautomatically return
to 0 minute.
4. Touch the ‘Timer’, the timer is cancelled,
and the “--” will show in the minute display
5. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer indicator
will flash for 5 seconds.
6. Buzzer will beep for 30 seconds and the timer indicator
shows “- -“ when the set time finished.
3. Set the time by touching the control of the timer
Hint:
Touch the “-“ or “+” control of the timer once to decrease
or increase by 1 minute. Touch and hold the “-“ or ”+” control of
the timer to decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will
automatically return to 0 minute.
