P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 0
USING YOUR CERAMIC HOB
TO START COOKING
• After power on, the buzzer beeps once, all the indicators light up for
1 second then go out, indicating that the ceramic hob has entered the
state of standby mode.
1. Touch the ON/OFF control. All the indicators show “-“
or “- -“ , indicating that the ceramic hob has entered the
state of standby mode.
WHEN YOU HAVE FINISHED COOKING
1.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Touching the heating zone selection control,
and a indicator next to the key will flash.
4. Select a heat setting by touching the “-“ or “+” control.
•
If you don’t choose a heat setting within 1 minute, the Induction hob will
•
You can modify the heat setting at any time during cooking.
•
By holding down either of these buttons, the value will adjust up or down.
5. When zone 1 or 3 is working, activate dual zone or Oval zone
by pressing
