2
Installation
The WL3 is a Leisure and Inflatable Lifejacket version of the W3 Light. It is the
responsibility of the lifejacket owner to ensure that the light is attached securely
and is in the correct position on the lifejacket to provide maximum visibility when
the wearer is in the water. Place the unit on a strap and insert the clip from below
until it locks in place.
Clip part no.1960.
“
must be ordered separately”.
The complete unit may be changed by the lifejacket owner, no specialised tools
are required.
Operation
The DAN WL3 is switched on automatically when the sensor is immersed in water
and can be switched off and back on by pressing the on/off button. The light can
also be activated and deactivated manually under dry conditions by pressing the
on/off button.
