W W W . D A N G E R O U S P O W E R . C O M
60
RAps™ Flip leveR AsA
ReMOvAl AnD MAintenAnCe
(COntinueD)
11. Use a lightly dampened cloth and/or cotton swab to
remove debris or grime from all RAPS
TM
ASA
components, including the piston, spring, lever, and
casing.
(SEE PIC H)
12. Clean and inspect o-ring located on the base of the
piston. Replace o-ring if it appears worn, cracked, or
damaged. Using a cotton swab, apply a small amount of
DP-40 lubricant on the o-ring.
(SEE PIC I)
13. Make sure the spring is properly seated on the piston,
then reassemble the RAPS
TM
ASA in the reverse order of
assembly.
(SEE PIC J)
WARNING
REMEMBER TO DE-GAS THE FX BEFORE
SERVICING THE RAPS
TM
ASA. FOLLOW
INSTRUCTIONS PREVIOUSLY OUTLINED ON
PAGE 41 TO SAFELY AND PROPERLY REMOVE
EXCESS AIR FROM THE MARKER.
H
J
I