14
a)
Press
PROG
until Event 1 fl ashes, then
press
DAY
to move from current day to
Day 1 (
Event 1, Day 1
).
b) Amend the time and temperature as
follows:
i) Use
+ and –
buttons to alter time
(press and hold to change in 10 min
increments).
ii) Use
and
buttons to alter the water
temperature in 0.5°C (1°F) steps.
iii) Press
NEXT
to advance to next preset time
and temperature (
Event 2, Day 1
).
iv) Repeat steps i, ii & iii above for Events 2,
3, 4, 5 & 6.
c)
When all 6 events are correct, press
DAY
to programme events for Day 2.
(If you wish to repeat the previous day’s
programme, simply press
COPY
) .
d)
Repeat steps i-iii above to programme
(or
COPY
) events for Days 3, 4, 5, 6 & 7.
Press
PROG
until the colon in the LCD display
starts to fl ash.
The unit is now in
RUN mode
and your
hot water will come on and go off at the
programmed times.
Proceed to page 16.
Programming in 7-day mode
(separate programmes for each day of the week)
P
rogr
amming in 7-
da
y mode
