Danfoss VLT MCA 117 Operating Manual Download Page 21

Page: 21 / 90

LED label

Description

ST/MS

Module status (DP-V1 communication and Ident number detection)

LA2/NS2

Not used

Table 4: Net Status, ST/MS

State

LED

Description

Power on

Red:

Solid red

The option is defect. Contact Danfoss.

Green:

Flashing
green

The option is OK.

Baud rate search

Green:

Flashing
green

Searching for the baud rate. Check the connection
to the master if the option stays in this state.

Wait parameterizing

Green:

Long green
flash

Baud rate found - waiting for parameters from the
master.

Red:

Long red flash

Wrong parameters from the master.

Wait configuration

Green:

Short green
flash

Parameters from master OK - waiting for configura-
tion data.

Red:

Short red flash

Wrong configuration data from the master.

Data exchange

Green:

Solid green

Data exchange between the master and the FCD 302
is active.

Red:

Flashing red

Clear state.

Warning 34, Fieldbus Fault

is active and a

bus reaction in

parameter 8-04 Control Word Timeout

Function

is executed.

Table 5: Module Status (ST/MS LED while Detecting Ident Number)

LED description

Description

Green

One short flash

Testing for FCD 300, 12 MB version

Green

Two short flashes

Testing for FCD 300, 3 MB version

Green

Three short flashes

Testing for FCD 302

Green

One long, one short flash

Testing for FCM 300, 3 MB version

Green

One long, 2 short flashes

Testing for FCM 300, 12 MB version

Table 6: Module Status (DP-V1 Communication)

Description

No light

Off

No PROFIBUS DP-V1 communication is active.

Green:

Short green flash

DP-V1 communication from a Master Class 1 (PLC) is active.

Green:

Long green flash

DP-V1 communication from a Master Class 2 (MCT 10, FDT) is active.

Green:

Solid green

DP-V1 communication from a Master Class 1 and 2 is active.

Red:

Flashing red

Internal error.

Configuring the System

Operating Guide | VLT® FCD 300 PROFIBUS Converter MCA 117

AQ289550754901en-000101 / 130R0890| 21

Summary of Contents for VLT MCA 117



























































































Search results

Summary of Contents for VLT MCA 117

Reviews:

Related manuals for VLT MCA 117

Brands by name

Popular brands

Danfoss VLT MCA 117, Operating Manual

Search results

Summary of Contents for VLT MCA 117

Reviews:

Related manuals for VLT MCA 117

Brands by name

Popular brands