3.
Connect terminal X44/10 to a digital input of the
frequency converter. For reference when
programming, note the number of selected
digital input.
Assembly
1.
Remove the knock-out in the extended LCP
frame, so that the option fits under the extended
LCP frame.
2.
Fit the extended LCP frame and terminal cover.
3.
Fit the LCP or blind cover in the extended LCP
frame.
4.
To indicate that the ATEX module is integrated,
apply the delivered sticker to the front of the
frequency converter, see
Illustration 1.1
.
5.
Connect power to the frequency converter.
6.
Perform risk assessment and a commissioning
test according to EN ISO 12100.
Installation
Operating Instructions
MG33V302
Danfoss A/S © 01/2015 All rights reserved.
11
3
3
