•
•
•
1.
6.3.3 Terminal Overview of Enclosure Size H6
1
95
99
L1 91 / L2 92 / L3 93
U 96 / V 97 / W 98
03
02
01
06
05
04
2
3
4
e3
0b
b7
62
.1
2
Illustration 29: Enclosure Size H6
1
Mains
2
Ground
3
Compressor
4
Relays
6.3.4 Connecting to Mains and Compressor Terminals
Tighten all terminals in accordance with the information provided in
.
Keep the compressor cable as short as possible to reduce the noise level and leakage currents.
Use a shielded/armored compressor cable to comply with the EMC emission specifications and connect this cable to both the
decoupling plate and the compressor. Also see
6.5.5 EMC-compliant Electrical Installation
.
Connect the ground cable to the ground terminal, then connect the mains supply to terminals L1, L2, and L3.
e3
0b
i9
68
.1
0
AJ330233902305en-000201 / 130R0596
48 | Danfoss A/S © 2021.05
Electrical Installation
Considerations
VLT® Compressor Drive CDS 803
Design Guide
