Danfoss VLT Automation Drive FC 360, Programming Manual

Page: 25 / 156

0-24 Display Line 3 Large
Option: Function:
[1672] Counter A
[1673] Counter B
[1679] Analog Output AO45
[1680] Fieldbus CTW 1
[1682] Fieldbus REF 1
[1684] Comm. Option STW
[1685] FC Port CTW 1
[1686] FC Port REF 1
[1690] Alarm Word
[1691] Alarm Word 2
[1692] Warning Word
[1693] Warning Word 2
[1694] Ext. Status Word
[1695] Ext. Status Word 2
[1697] Alarm Word 3
[1890] Process PID Error
[1891] Process PID Output
[1892] Process PID Clamped Output
[1893] Process PID Gain Scaled Output
[2117] Ext. 1 Reference [Unit]
[2118] Ext. 1 Feedback [Unit]
[2119] Ext. 1 Output [%]
[3401] PCD 1 Write For Application
[3402] PCD 2 Write For Application
[3403] PCD 3 Write For Application
[3404] PCD 4 Write For Application
[3405] PCD 5 Write For Application
[3406] PCD 6 Write For Application
[3407] PCD 7 Write For Application
[3408] PCD 8 Write For Application
[3409] PCD 9 Write For Application
[3410] PCD 10 Write For Application
[3421] PCD 1 Read For Application
[3422] PCD 2 Read For Application
[3423] PCD 3 Read For Application
[3424] PCD 4 Read For Application
[3425] PCD 5 Read For Application
[3426] PCD 6 Read For Application
[3427] PCD 7 Read For Application
[3428] PCD 8 Read For Application
[3429] PCD 9 Read For Application
[3430] PCD 10 Read For Application
[3450] Actual Position
[3456] Track Error
4.1.4 0-3* LCP Custom Readout
It is possible to customise the display elements in the LCP.
Custom readout
The calculated value to be shown is based on settings in
parameter 0-30 Custom Readout Unit ,
parameter 0-31 Custom Readout Min Value (linear only),
parameter 0-32 Custom Readout Max Value ,
parameter 4-14 Motor Speed High Limit [Hz] , and actual
speed.
130BD380.10
0
Custom Readout (Value)
P 16-09
Custom Readout
Unit P 0-30
Max value
P 0-32
Min value
P 0-31
Motor Speed
Motor Speed
High limit
P 4-14 (Hz)
Linear Unit (e
.g. Speed and flo
w)
Quadr
atic Unit (P
ressur
e)
Cubic Unit (P
ow
er)
Liniar
units only
Illustration 4.1 Custom Readout
The relation depends on the type of unit selected in
parameter 0-30 Custom Readout Unit :
Unit type Speed relation
Dimensionless
Linear
Speed
Flow, volume
Flow, mass
Velocity
Length
Temperature
Pressure
Quadratic
Power Cubic
Table 4.1 Relation between Unit Type and Speed
0-30 Custom Readout Unit
Option: Function:
Set a value to be shown in the LCP. The value has
a linear, squared, or cubed relation to speed. This
relation depends on the unit selected. See
Table 4.1 . The actual calculated valued can be
read in parameter 16-09 Custom Readout .
[0] None
[1]
*
%
[5] PPM
[10] 1/min
Parameter Descriptions Programming Guide
MG06C602 Danfoss A/S © 7/2015 All rights reserved. 23
4 4