Danfoss Vacon NXS Series, Operating Manual

Page: 7 / 238

8.7.9.10 Debug Menu (S6.8.7) 140
8.8 Using the Expander Board Menu 140
8.8.1 Expander Board Menu 140
8.8.2 Examining the Connected Option Boards 140
8.8.3 Finding the Option Board Parameters 141
8.9 Further Control Panel Functions 141
9 Commissioning 142
9.1 Safety Checks before Starting the Commissioning 142
9.2 Commissioning the AC Drive 143
9.3 Measuring the Cable and Motor Insulation 144
9.3.1 Insulation Checks of the Motor Cable 144
9.3.2 Insulation Checks of the Mains Cable 145
9.3.3 Insulation Checks of the Motor 145
9.4 Checks after Commissioning 146
9.4.1 Testing the AC Drive after Commissioning 146
9.4.2 RUN Test without Load 146
9.4.2.1 Test A: Controls from the Control Terminals 146
9.4.2.2 Test B: Control from the Keypad 147
9.4.3 Start-up Test 147
9.4.4 Identification Run 147
10 Maintenance 148
10.1 Maintenance Schedule 148
10.2 Reforming the Capacitors 148
11 Fault Tracing 150
11.1 General Information on Fault Tracing 150
11.2 Resetting a Fault 150
11.3 Creating Service Info File 151
12 Specifications 152
12.1 Weights of the AC Drive 152
12.2 Dimensions 152
12.2.1 List of Dimension Information 152
12.2.2 Wall-mounted 153
12.2.2.1 Dimensions for FR4–FR6 153
12.2.2.2 Dimensions for FR7 155
12.2.2.3 Dimensions for FR8 157
12.2.2.4 Dimensions for FR9 159
12.2.3 Flange mounting 161
12.2.3.1 Dimensions for Flange Mounting, FR4–FR6 161
12.2.3.2 Dimensions for Flange Mounting, FR7–FR8 163
Contents Operating Guide | VACON® NXS/NXP Air-cooled
AQ275638903263en-000301 / | 7 Danfoss A/S © 2020.02