•
•
•
•
•
•
•
•
•
•
•
4 Local/Remote Control Application
4.1 Introduction to Local/Remote Control Application
Select the Local/Remote Control Application in menu
M6
on page
S6.2
.
With the Local/Remote Control Application, it is possible to have two different control places. For each control place the frequency
reference can be selected from either the control panel, I/O terminal, or fieldbus. The active control place is selected with the digital
input DIN 6.
All outputs are freely programmable.
Extra functions:
Programmable Start/Stop and Reverse signal logic
Reference scaling
One frequency limit supervision
Second ramps and S-shape ramp programming
Programmable start and stop functions
DC brake at stop
One prohibit frequency area
Programmable U/f curve and switching frequency
Auto restart
Motor thermal and stall protection: Programmable action; off, warning, fault
The parameters of the Local/Remote Control Application are explained in Chapter Parameter descriptions of this manual. The ex-
planations are arranged according to the individual ID number of the parameter.
AB296635287482en-000301 / DPD00903 | 29
Danfoss A/S © 2023.02
Local/Remote Control Application
VACON® NX All-in-One
Application Guide
Summary of Contents for VACON NX
Page 1: ...Application Guide VACON NX All in One drives danfoss com...
Page 2: ......
