18
TPOne-RF
Temperature
Limits
This allows the upper and lower temperature of
the thermostat setting range to be limited.
Defaults:
Minimum 5°C,
Maximum 35°C
Frost Protect
To help protect against damage to the heating
system caused by extreme low temperatures the
TPOne includes a Frost Protect level. This is the
minimum temperature level and is also used when
the TPOne is placed in standby mode.
Default:
5°C
Temperature
Override
This establishes the degree of manual temperature
override available to the user, No Limit, L/-
2°C or No Override
Default:
No Limit
Daylight
Saving
Choose to set automatic daylight saving changes
on or off.
Default:
On
Button Lock
Button lock can be set to avoid unintentional
setting changes. To activate buttons while button
lock is active the user must press the OK button
for 5 seconds.
Default:
Off
Display Idle
Mode
When the TPOne is in idle mode the display can be
set to go off. The display will come on when any
button is pressed.
Default:
On
Installer Settings
(Continued)
