Product Label
Illustration 2.2: Product Label
The product label on the side of the inverter
shows:
•
Inverter type
•
Important specifications
•
Serial number, see (1), for identifi-
cation by Danfoss
2.1.1. Installation Sequence
1.
Read the installation manual. Pay special attention to the section
Important Safety In-
formation
.
2.
Install the inverter according to the section
Installation Dimensions and Patterns
and
the section
Mounting the Inverter
.
3.
Open the inverter according to the section
Opening and Closing the Inverter
.
4.
Install AC according to the section
AC Grid Connection
.
5.
Install PV. Remember to use the terminal block to establish parallel connection (if re-
quired), as described in the section
PV Connection
. The inverter has auto-detection.
6.
Install Auxiliary input according to the section
Connection of Peripheral Units
.
7.
Close the inverter according to the section
Opening and Closing the Inverter
.
8.
Turn on AC at the mains switch.
9.
Set language, time, date, installed PV power and country:
-
For setup via the integrated Web Server, see the TripleLynx CN User Manual,
Web Server
Quick Guide
section
-
For setup via the display, see the section
Start-up and Check of Settings
in
this manual.
10.
Turn on PV by turning the PV load switch on.
11.
Verify the installation by comparing with the auto-detection result in the display, as de-
scribed in the section
PV Connection
.
12.
The inverter is now ready for operation.
2. Introduction
6
L00410580-01_02
2
