9
Before you start
Open the fl
ap on the front of the
programmer.
Press the
+ & –
AND
&
buttons
simultaneously to reset the unit.
This will reinstate the preset programmes
and will set the time to 12:00 on Day 1 and
the temperature to 20°C.
Setting the Clock & Day
Note: clock is displayed in 24 hour mode.
CLOCK
Press
PROG
to begin programming.
Use
+ or -
to adjust the TIME (press and
hold to change in 10 min increments).
DAY
Press
PROG
again.
Use
+ or -
buttons until correct DAY is
shown (1 = Monday, 2 = Tuesday, etc).
Remember - you will have to reset
the time when the clocks change in
Spring and Autumn.
i2 00
!
U
ser Instruc
tions
GB
