3 Start-up and Check of Settings
3.1.1 Initial Setup
The inverter is shipped with a predefined set of settings
for different grids. All grid specific limits are stored in the
inverter and must be selected at installation. It is always
possible to see the applied grid limits in the display. The
inverter accounts for daylight saving automatically.
After installation, check all cables and then close the
inverter.
Turn on AC at the mains switch.
Follow the setup wizard in the display, or, alternatively, set
up the inverter via the web interface.
When prompted by the display select language. This
selection has no influence on the operating parameters of
the inverter and is not a grid code selection.
Illustration 3.1 Select Language
The language is set to English at initial start-up. To change
this setting press the OK button. Press ‘
▼
’ to scroll down
through the languages. Select language by pressing ‘OK’.
NOTE
To use the default language (English) simply press the 'OK'
button twice to select and accept.
Illustration 3.2 Set Time
Set time as prompted by the display. Press 'OK' to select
number. Press ‘
▲
’ to scroll up through the numbers. Select
by pressing 'OK'.
The clock is 24-hour format.
NOTE
It is very important to set the time and date accurately as
the inverter uses this for logging. If an incorrect time/date
is accidentally set, correct it immediately in the set date
and time menu [Setup
→
Inverter details
→
Set date and
time].
Illustration 3.3 Set Date
Set date as prompted by the display. Press 'OK' to select.
Press ‘
▲
’ to scroll up through the numbers. Select by
pressing 'OK'.
Start-up and Check of Setti...
L00410309-09_02
15
3
3
www.neoenerji.com
