In stall ati o n an d O pe r ati o n G u i de
S m a r t R a d i a t o r P a g e | 7
5.
Remove the side lid and insert the two provided AA batteries. Please, refer to the
drawings within the thermostatic head to insert the batteries properly. Click on
Continue
(Fig. 03 to 05);
6.
The letter “M” should flash on the screen. If this is not the case, you will have to
reset the device (to do so, see point 3.3. Factory reset);
7.
Push once on the central control button
, the letter M should flash quickly on
the LCD display (fig. 06). This means that the module is connecting to the gateway;
click on
Continue
.
F ig u r e 0 3
O p e n in g t h e s i d e - li d
F i g u r e 0 4
In s e r t i n g b a t t e r i e s
F i g u r e 0 5
C l o s i n g t h e l id