In stall ati o n an d O pe r ati o n G u i de
S m a r t R a d i a t o r P a g e | 1 8
If the connection continues to fail, try to reset the thermostatic head (please refer to point
3.3.) and to pair it again by following the steps 6 to 11 of the section 2.1.
3.7.
Adjusting to radiator/room conditions
Press for at least 3 seconds until M is displayed.
Press twice until Pb is displayed, then press
.
The default setting is P2.
Use P1 if the radiator appears oversized for the room.
Use P3 if it is undersized*.
Select P1, P2 or P3 using navigations keys
and exit using
.
*The frequency of P1, P2, and P3 regulation varies to compensate for radiator over/undersizing .
3.8.
Disposal
The thermostat must be disposed of as electronic waste.