A fault may have arisen in the pairing of the Bluetooth® gateway.
Solution:
Remove the pairing, and then pair the device again according to
3. Pairing the gateway
1. Remove the pairing:
Open Bluetooth® Devices in Control Panel (as shown in
3. Pairing the gateway
)
Click on the Danfoss Bluetooth® gateway, and then click on the Remove button.
2. Pair the devices again as shown in
3. Pairing the gateway
Many external Bluetooth® adapters are delivered with
BlueSoleil
software drivers. A test of the drivers
shows that they may have problems with the communication speed of Tool4Cool® LabEdition. A solu-
tion to this can be to force Tool4Cool® LabEdition to insert delays in the communication.
Solution:
This can be done by enabling
RS485
in the network setting of Tool4Cool® LabEdition. To en-
able RS485 in Tool4Cool® LabEdition please perform the following steps:
1. Disconnect.
2. In the
File
menu select “Connect Network”.
3. Select the Bluetooth® COM - port in the
Connect Using
menu.
8.4 There is no
connection
between the
computer and the
device served by
the gateway
Operating Instructions
Danfoss Bluetooth® Gateway with Tool4Cool® LabEdition
21
DEHC.PS.300.D1.02