© Danfoss, 2015-09
L1216285 • Rev BC • Sep 2015
3
Følgende tekniske data bygger på typiske testresultater. Der anvendes mineralsk olie med en
viskositet på 21 mm
2
/s [102 SUS] og en temperatur på 50°C [122°F].
The following technical data are from typical test results. For the hydraulic system a mineral based
hydraulic oil with a viscosity of 21 mm
2
/s [102 SUS] and a temperature of 50°C [122°F] were used.
Folgende technische Daten bauen auf typische Testergebnisse. Es wurde Mineralöl mit einer
Viskosität von 21 mm
2
/s [102 SUS] und einer Temperatur von 50°C [122°F] verwendet.
Les caractéristiques techniques suivantes sont tirées de résultats de tests typiques. Pour le
système hydraulique, on a utilisé une huile minérale d’une viscosité de 21 mm
2
/s [102 SUS] et à une
température de 50°C [122°F].
PVEO
Supply voltage U
DC
rated
12 V
DC
24 V
DC
range
11 to 15 V
DC
22 to 30 V
DC
max. ripple
5%
Current consumption at rated voltage
320 mA @ 12 V
DC
365 mA @ 24 V
DC
Power consumption
4 W
PVEA, PVEA-F
Supply voltage U
DC
rated / range
11 V to 32 V
max. ripple
5%
Current consumption
at rated voltage
320 mA @ 12 V
DC
170 mA @ 24 V
DC
Signal voltage
PVEA - neutral
0.5 x U
DC
PVEA - A-port
↔
B-port 0.25 • U
DC
to 0.75 • U
DC
Signal current
at rated voltage
0.25 mA to 0.70 mA
Input impedance in relation to 0.5 • U
DC
12 K
Ω
Input capacitor
100 uF
Power consumption
3.5 W
Oil viscosity
Oil
viscosity
range 12
– 75 mm
2
/s
[65
– 347 SUS]
min.
4 mm
2
/s [39 SUS]
max.
460 mm
2
/s [2128 SUS]
Bemærk: Maksimum opstartsviskositet
Note: Max. start up viscosity 2500 mm
2
/s
Beachte: Maximale Viskosität bei Inbetriebnahme
Remarque : Viscosité maximale au démarrage 2500 mm
2
/s
Filtering in the hydraulic system
Required
operating
cleanliness level
18/16/13
(ISO 4406, 1999 version)
Oil temperature
Oil
temperature
range 30 – 60˚C [86 – 140˚F]
min.
-30˚C [-22˚F]
max.
90˚C [194˚F]
Operating temperature
Ambient
-30 – 60˚C [-22 – 140˚F]
Stock
-40 – 90˚C [-40 – 194˚F]
Recommended long
time storage in
packaging
10 – 30˚C [50 – 86˚F]
Pilot pressure
Pilot pressure
(relative to T
pressure)
nom.
13.5 bar [196 psi]
min.
10 bar [145 psi]
max.
15 bar [217 psi]
Grade of enclosure*
Connector version
Deutsch
IP 67
* According to the international standard IEC 529.
Technical data
Bemærk: I særligt udsatte maskiner anbefales der beskyttelse med en skærm.
Beachte: In besonders ausgesetzten Maschinen wird Schutz in Form von
elektrischer Abschirmung empfohlen.
NB: In particularly exposed applications, protection by screen is recommended.
Remarque: Pour les applications particulièrement exposées, il est recommandé
d’installer une protection par écran.
PVE-CI
Supply voltage U
DC
rated
11 to 32 V
DC
range
11 to 32 V
DC
ripple
maximum 5%
Current consumption at rated voltage
320 mA @ 12 V
DC
170mA @ 24 V
DC
Power consumption
0.5 W
Oil consumption
Neutral
0.04 l/min
Full flow steady state
1 l/min
Peak
1.3 l/min
