Danfoss P1K5, Design Manual, Page: 2 / 97

Contents
1 How to Read this Design Guide
5
1.1.1 Copyright, Limitation of Liability and Revision Rights 5
1.1.2 Available Literature 5
1.1.3 Symbols 6
1.1.4 Abbreviations 6
1.1.5 Definitions 7
2 Safety and Conformity
10
2.1 Safety
10
2.2 CE Labeling
11
2.3 Aggressive Environments
12
2.4 Vibration and Shock
12
3 Introduction to VLT Micro Drive
18
3.1 Control Structures
18
3.2 General Aspects of EMC
21
3.2.1 General Aspects of EMC Emissions 21
3.2.2 Emission Requirements 22
3.3 Galvanic Isolation (PELV) 23
3.4 Earth Leakage Current 23
3.5 Extreme Running Conditions 25
4 VLT Micro Drive Selection
26
4.1 Options and Accessories
26
4.1.1 Local Control Panel (LCP) 26
4.1.2 FC 51 LCP Mounting Instruction 27
4.1.3 FC 51 Remote Mounting Kit Mounting Instruction 28
4.1.4 IP21/TYPE 1 Enclosure Kit 30
4.1.5 Type 1 (NEMA) 30
4.1.6 De-Coupling 30
4.1.7 FC 51 Type 1 Kit Mounting Instruction for M1, M2 and M3 31
4.1.8 FC 51 Type 1 Kit Mounting Instruction for M4 and M5 32
4.1.9 FC 51 IP21 Kit Mounting Instruction 33
4.1.10 FC 51 De-coupling Plate Mounting Instruction for M1 and M2 34
4.1.11 FC 51 De-coupling Plate Mounting Instruction for M3 35
4.1.12 FC 51 De-coupling Plate Mounting Instruction for M4 and M5 36
4.1.13 FC 51 DIN Rail Kit Mounting Instruction 37
4.2 Special Condition
38
4.2.1 Purpose of Derating 38
4.2.2 Derating for Ambient Temperature 38
Contents VLT Micro Drive Design Guide
MG02K102 - VLT
®
is a registered Danfoss trademark 1