16 - Fan speed controller setting for R134a/R513A
refrigerant
15 - Version control
FSC type
Fan speed Controller
Spare part number
Refrigerant
letter
For Refrigerant
Factory
setting
Action required
XGE-2C
061H3144
Q
R404A/R452A/R507
15 bar
360°=1 turn = Approx 0.8 bar
(Clockwise rotation =
Increase pressure setting,
Counter clockwise rotation =
Decrease pressure setting)
V
R404A/R507/R134a/R513A/R448A/
R449A/R452A
If refrigerant used is R134a or R513A
Rotate the screw by 9 turns in counter
clockwise direction to reach 8 bar
17 - Pressostat factory settings
Refrigerants
High pressure settings (bar (g))
Low pressure settings (bar (g))
ON
OFF
ON
OFF
R404A/R507/R448A/R449A/R452A
23
27
2
1
R134a/R513A
13
17
2
1
Version
W02
W04
W08
W10
Service valves
X
X
X
X
High pressure cartridge
Low Pressure cartridge
X
Receiver
X
X
X
X
Filter drier
X
X
X
X
Sight Glass
X
X
X
X
Solenoid Valve
X
Cranckase Heater
X*
)
X*
)
Full Ebox
X
X
X
Fan speed controller
X
Dual Pressure switch KP
X
X
X
X
*) - Only for LBP Model
13 - Warranty
Always transmit the model number and serial num-
ber with any claim filed regarding this product.
The product warranty may be void in following
cases:
• Absence of nameplate.
•
External modifications; in particular, drilling,
welding, broken feet and shock marks.
• Compressor opened or returned unsealed.
• Rust, water or leak detection dye inside the
compressor.
• Use of a refrigerant or lubricant not approved by
Danfoss.
• Any deviation from recommended instructions
pertaining to installation, application or mainte-
nance.
• Use in mobile applications.
• Use in explosive atmospheric environment.
• No model number or serial number transmitted
with the warranty claim.
14 – Disposal
Danfoss recommends that condensing units and
oil should be recycled by a suitable company at
its site.
Instructions
AN238286441930en-001101 | 3
© Danfoss | DCS (CC) | 2019.01