8
VISGX45X © Danfoss 04/2011
Installation Guide
Danfoss Link™ HR
When the Danfoss Link™ HR has
been added to the Danfoss Link™
CC Central Controller, a network test
should be performed .
For more information on network
tests, see the Danfoss Link™ CC
instruction manual:
Configuration 8:
Perform network test
.
Perform network test
Green LED ON
Relay OFF/Standby
Red LED ON
Relay ON/Heating
Green LED fast flash
Inclusion or link test
Red LED short flash
Inclusion not OK
Link test not OK
Note: If the fuse has burned you can replace it with the spare
fuse, located in the fuse holder .
Trouble shooting
1 .
Hold both install buttons in front
of the device for approx . 5 sec . until
LED gives a red flash .
Factory reset
