Ikargo2 General Safety
The following safety instructions must be read carefully to install and use the product properly, and to
keep it in perfect working condition, and to reduce the risk of misuse.
•
Strictly adhere to the installation instructions contained in this document.
•
Make sure that professional and competent personnel carry out the installation.
•
Ensure that all site and prevailing safety regulations are fully respected.
•
Make sure that this document is permanently available to the operator and maintenance personnel.
•
Keep the transmitter out of reach of non-authorized personnel.
•
Remove the transmission key when the set is not in use.
•
Check each working day the STOP button and other safety measures. When in doubt, press the STOP
button.
•
Whenever several sets have been installed, make sure the transmitter is the right one. Identify the
machine controlled on the label for this purpose on the transmitter or by using the display (in case it
has one).
•
Service the equipment periodically.
•
When carrying out repairs, use spare parts supplied by Danfoss only.
W
Warning
Potential damage to the operator or the product. Do not use this product on machines in potentially
explosive atmospheres unless the model is ATEX/RATEX certified to work in such conditions.
Ikargo2 Safety Quick Guide
Follow the Safety Quick Guidelines below to reduce risk of injury to the operator or the product.
Changes or modifications not approved by Danfoss can void the user's authority to operate this product.
Remove the transmission key only when the
set is not in use or to deny the access.
When in doubt, press the STOP button.
Make sure the transmitter works with the
machine to be handled.
After use set the contact key and the STOP
button.
Do not use the set when visibility is limited. Avoid knocking or dropping the set.
User Manual
Ikargo2 Transmitter
Safety instructions
4 |
©
Danfoss | February 2021
BC312438493831en-000201
