Ikargo1 maintenance tips
This product is designed for use in an industrial environment that may shorten the product's lifespan. Use
these tips to maximize the lifespan of the product.
•
Use the hook/belt provided with the transmitter to prevent the transmitter from falling
•
Do not clean the transmitter with solvents or pressurized water; use a damp cloth or soft brush for
cleaning
•
If the push buttons show signs of deterioration, contact the Authorized Technical Service for repair
•
Check if the battery contacts are correct, otherwise replace them.
•
Ensure that the product is supplied with AAA alkaline batteries or has a rechargeable battery
•
Be sure to recharge or replace battery regularly
Maintenance tips quick reference
Ikargo1 troubleshooting
The transmitter has status monitoring LED's which help identify irregularities. The most common signals
are contained in the table below:
Color and frequency
Pulse frequency
Description
Action
Green | continuous
Working
Operate
Green | slow pulses
Latency; no action has been taken for some time
Press START to return to operation
mode
Red | slow pulses
Low battery signal
Replace or recharge battery
Red | fast pulses
EEPROM module missing or corrupt
Check EEPROM and reprogram if
necessary
Red | double pulses
A maneuver is activated at transmitter start up process;
may indicate hardware damage if no order is active
Release maneuver or replace
transmitter if necessary
Red | continuous
General hardware failure
Replace transmitter
User Manual
Ikargo1 Transmitter
Maintenance
8 |
©
Danfoss | February 2021
BC295377198224en-000102
