IKARGO start up
In order to turn the transmitter on (OPERATION mode), follow the next steps.
1. Insert the charged BT11K battery model in the transmitter and ensure the EEPROM module is in place.
The battery must be charged according to the charger manual's instruction.
ikargo
crane ??
ikargo
ikargo
Pulso LED
Display
LED pulse
ika
rgo
BT11K
EEPROM
module
2. Turn the multi-key from the "0" position to the "1" position.
The multi-key cannot be removed while in the "1" position.
ikargo
crane ??
ikargo
ikargo
Pulso LED
Display
LED pulse
ika
rgo
BT11K
EEPROM
module
3. Push and pull out the stop button.
The LED will blink in blue-green colors and the battery level will appear in the display. It is
recommended to introduce the machine identifier (example: EOT crane number).
ikargo
crane ??
ikargo
ikargo
Pulso LED
Display
LED pulse
ika
rgo
BT11K
EEPROM
module
4. Press START with the multi-key until the radio link is performed.
The LED color will turn green to indicate that the transmitter and receiver link is confirmed. After
confirmation, press the maneuver buttons to verify corresponding movements.
ikargo
crane ??
ikargo
ikargo
Pulso LED
Display
LED pulse
ika
rgo
BT11K
EEPROM
module
User Manual
Ikargo1 Transmitter
Technical description
©
Danfoss | February 2021
BC295377198224en-000102 | 7
