Produced by Danfoss Floor Heating Hydronics 05.2011
7
VI.CU.C2.2D
Produced by Danfoss Floor Heating Hydronics 05.2011
Instruction FH-CWP Thermostat
2. Mounting
Placing the Room Thermostat - fig. 4
! Wherever possible, the room thermostat should be
installed where the effects of sunlight, draught, and
other heaters (eg. TV’s), etc. are avoided.
3. Installation
Installing the Room Thermostat- fig. 5 and fig. 6
• Remove the connection cable between front and
back part.
• Connect the thermostat correctly to mains supply
according to the Wiring Diagram - fig 6.
• Mount the thermostat by using the enclosed
screws to the wall box.
• Mount the front correctly.
Wiring Diagram – fig 6
The product must be connected to the following
leads:
• Term L:
Phase (L) AC85-250V, 50/60 Hz
• Term NO:
Valve (NO)
• Term NC:
Valve (NC)
• Term N:
Neutral (N)
• Term 2:
Empty
• Terminal S2:
Floor sensor
• Terminal S1:
Floor sensor
Summary of Contents for FH-CWP
