![background image](http://html1.mh-extra.com/html/danfoss/et9700/et9700_operators-manual_3404210033.webp)
5.4.2 Aligning the bending pins
Work pieces up to 3”
1.
Open protective cover (1).
2.
Attach the bending pin (2) at the appropriate location.
•
The bending pin position and the work piece diameter
must be matched to each other:
• Large work piece diameter = large bending pin distance
• Small work piece diameter = small bending pin distance
3” work pieces
1.
Open protective cover (1).
2.
Remove the bending pins (2).