![background image](http://html1.mh-extra.com/html/danfoss/et9600/et9600_operators-manual_3404317040.webp)
6.
Hold the shaft (4) with a hexagon socket wrench and release the
nut (3) using an open-end wrench.
The nut has a left-hand thread!
7.
Remove the washer (2) and cutting knife (1) from the shaft and
place them down carefully.
8.
Attach the new cutting knife in the reverse order.
ATTENTION!
Risk of damage to machinery!
If the directions of rotation of the motor and the knife do not
match, there is a risk that the knife will be destroyed during cut-
ting.
• Check the direction of rotation before starting the machine.
Observe the cutting direction!
The direction of rotation is to the left when viewing the free end of
the shaft (TMG only).