5.5 Emergency stop
In case of emergency
In case of emergency, immediately deactivate the machine at the
main power switch. The cutting process is stopped. The drive unit is
shut down.
Restart after an emergency
WARNING!
Risk of injuries!
The emergency-stop button was probably activated due to the
occurrence of a hazardous situation. A restart of the machine
may cause injuries if the hazardous situation has not yet been
remedied!
• Remedy the hazardous situation before a restart.
1.
Remedy the cause of the emergency stop.
2.
Restart the machine at the main power switch.
5.6 Overload protection
The motor is protected against overload by a motor protection switch.
After a motor overload, if any, let the motor cool down and restart it.
The restart protection prevents an unintentional restart of the ma-
chine. Starting the machine is only possible by activating the main
power switch again.
Summary of Contents for ET9550
