Danfoss ET6300, Operator'S Manual

Page: 19 / 44

•
temperature between 10°C and 35°C,
•
maximum air humidity 80% (non-condensating).
4.3 Commissioning
The machine is commissioned by the customer's fitter.
1. Lift the machine manually and place it on the optionally supplied
table.
2. Mount the bearing block (2 to the guide carriage (1) using the
cylinder bolts (3).
The operating lever may optionally be mounted on the right, posi-
tion (B), or on the left, Position (A).