Danfoss ET4100, Operator'S Manual

Page: 25 / 60

3. Check the machine for damage.
4. Check the hydraulic piping for damage.
5. Train the operating staff
and record training sessions in “Decla-
ration of trained staff”, Section 9.
WARNING!
Risk of injuries!
Machine components might loosen during transport. Such com-
ponents might be flung out during to the forming process. There
is a risk of being injured.
• Open and close the machine several times without any work-
piece.
• Check the machine for atypical noise.
4.4 Mounting the telescopic handle
1. Insert the telescopic handle (1) in the handle adapter (1).
2. Adjust the hole on the telescopic handle to the hole on the han-
dle adapter.
3. Secure the telescopic handle (1) with the clamping pin (2).